Performance Introduction FUTURE

ADR type self-priming magnetic drive pump (hereinafter referred to as self-priming pump) This pump uses static seal to replace dynamic seal, so that the flow passage parts of the pump are completely sealed, completely solving the problems of running, emitting, dropping and leaking that cannot be avoided by other pump mechanical seals. The pump body and flow passage parts are made of corrosion-resistant stainless steel, tetrafluorographite and other materials, which not only have the function of DR type magnetic drive pump, but also integrate self-priming, There is no need for bottom valve and irrigation water, and the self-priming height is 4m.

The pump is compact in structure, beautiful in appearance, small in volume, low in noise, reliable in operation, and convenient in use and maintenance. It can be widely used in petroleum, chemical, pharmaceutical, electroplating, printing and dyeing, food, scientific research and other units to pump acid, alkali, oil, rare precious liquid, toxic liquid, volatile liquid, and supporting circulating water equipment, especially the pumping of leaky, flammable, explosive liquid.

CODE

Note: Explosion proof motors can be equipped with 0.37KW and above, and the materials of overcurrent components are 304, 304L, 316 and 316L respectively.

The working pressure of the system shall not be greater than 0.6MPa, the viscosity shall not be greater than 30X10-6m2/s, and the transportation of liquid without iron and hard solid particles.